SHOX.XTR
Extensions
The first mast extension with an integrated shock absorber – a real “chop eater” for more control, more speed and more comfort.
Be it speed, racing or freeride, with the SHOX .XTR you can finally appoint on a dead downwind course without fearing any control problems. Makes every rider 1-2 knots faster, immediately. In the waves, firstly the SHOX.XTR dampens landings and delivers a new level of board control when going down-the-line. Supports the pop in Freestyling by the rebound. In addition the damping improves reception on landings.
Thanks to a level adjuster the travel can be varied between 60 and 80 mm, with longer travel for tougher conditions and higher waves. Of course we have integrated the POWER.XTR ratchet mechanism for SDM as well as RDM masts. And all of this is achieved with only 100g of additional weight compared to a standard Power.XT extension.
SDM: L = 2 – 42 cm, necessary base sold separately
RDM: L = 6 – 42 cm, necessary base sold separately
Windsurfing Journal Germany (excerpts edition 1/2010)
“... It is not a marketing nonsense when NorthSails claims that you will get faster with the SHOX.XTR. Used on Freerace equipment the difference of about 5 km/h or 2.5 knots. The rougher the conditions the greater the speed difference is...After jumps the landing is dampened considerably. The flatter you land the greater the effect...The SHOX.XTR is only 98 grams heavier than the normal POWER.XTR.“
Boards UK (2010)
“... As for the claims of making all sailors immediately 1-2kts faster, listen up. One tester returned to the beach saying that he felt faster without the SHOX.XTR and was adamant that he’d beaten his GPS speed. However, the GPS doesn’t lie and he was in actual fact 3kts faster!...All of the testers said that after sailing with a SHOX.XTR, they’d rather sail with one than be without one. It doesn’t stop the board from bouncing in chop but certainly reduces the impact that has on the rig… The SHOX.XTR definitely helped people to feel more comfortable through gybes and blasting over chop, therefore allowing them to push harder and increase their speed…”
Brawzinho Browne, Victor Fernandez:
“A few days ago we have used the SHOX.XTR for the first time in Hookipa and were extremely surprised by the performance. The SHOX.XTR feels extremely nice in the waves. Very smooth on the way out when getting through white water, chop and every little bump ahead. Also the SHOX.XTR dampens the impact to the board when landing high jumps. But what surprised us the most was when jibing outside, sometimes with gusty wind and chop it takes you too long to get planning again and catching a wave. With the new SHOX.XTR you have that extra balance and can set yourself out faster, with that planning earlier and catching waves easier! The SHOX.XTR will definitely be our first choice from now on.“
UNI.XT RDM/SDM
| Model | Adjustment Range (cm) | Weight (g) |
| UNI.XT RDM S | 4 - 28 | 550 |
| UNI.XT RDM L | 4 - 42 | 640 |
| UNI.XT SDM S | 2 - 28 | 550 |
| UNI.XT SDM L | 2 x 42 | 640 |
UNI.XT Shox RDM/SDM
| Model | Adjustment Range (cm) | Weight (g) |
| UNI.XT Shox RDM | 4 - 42 | 800 |
| UNI.XT Shox SDM | 2 - 42 | 800 |
SHOX.XTR
| Model | Adustment Range (cm) | Weight (g) |
| SHOX.XTR RDM | 4 - 42 | 890 |
| SHOX.XTR SDM | 2 - 42 | 890 |
POWER.XTi SDM
| Model | Adustment Range (cm) | Weight (g) |
| POWER.XTi SDM S | 2 - 28 | 630 |
| POWER.XTi SDM L | 2 - 42 | 720 |
POWER.XTR SDM
| Model | Adjustment Range (cm) | Weight (g) |
| POWER.XTR SDM S | 2 - 28 | 630 |
| POWER:XTR SDM L | 2 - 42 | 720 |
iBASE Series
| Item | Weight (g) |
| iBASE + JOINT | 310 |
| iBASE + iTENDON | 260 |
| iBASE + iTENDON.SHOX | 210 |
| iBASE (plate only) | 110 |
You may also like UNI.XT RDM/SDM UNI.XT Shox RDM/SDM Shox.Upgarde.Kit POWER.XTi SDM POWER.XTR SDM iBASE Series iTENDON iTENDON.SHOX JOINT





