nsw_ws_tech_since_logo_1.pngTHE TRUE.RIG.BRAND

We are so convinced about the carbon qualities, the technology and the processing that we offer a two year unlimited warranty from now on all our masts (except PLATINUM AERO!)








THE essential quality criterion of carbon fibers when used for Windsurf masts is the bending-elongation of the fiber.


The elongation measures the traction during bending until the fiber finally breaks. For a Windsurf mast this means:  The higher the bending-elongation value of the carbon fiber raw material:

→ The faster the reflex speed (which ultimately increases the performance of your sail, similar to increased horse power in a car)

→ The higher the breakage strength

Carbon fibers are available with bending-elongation values between T300 and up to max T1000 with the T1000 carbon being 10-times as expensive as cheap T300 carbon. The lowest quality carbon fibers used on Windsurf masts have an elongation value of T300-400. This carbon has a bending-elongation that is just slightly higher than glass fiber. Therefore it’s used on cheap “low-percentage carbon masts” only. 80% of all brands nowadays use T400-500 for their top-level carbon masts.

NorthSails uses T600 carbon for all Red and SILVER masts, T700 for
all GOLD and PLATINUM masts and T800 for the PLATINUM Aero masts. Another advantage of the high quality carbon fibers is that you can reduce the resin content. For example the T800 fiber used for the PLATINUM Aero mast allows us to reduce the resin content by 30%. This results in an unmatched low weight without the usual loss of durability.

Silver Series: T600
Gold Series: T700
Platinum Series: T700
Platinum Aero: T800 with 30% reduced resin content




Introduced in 2001 the ALUTEX winding (on the base) gives even 100% carbon masts an unmatched durability.

That's why the PLATINUM is and remains the most durable mast in its class. We
are so convinced about the superior durability-values of the PLATINUM masts that as the first brand ever we offer a 2.YEAR.UNCONDITONAL.WARRANTY on a 100% carbon mast.








14_mast_feature3.jpgRDM vs. SDM

In general there are two diameters,

the SDM (standard) and the increasingly popular RDM (reduced) mast diameter. Not everyone knows that RDM masts make sense only up to lengths of around 430 cm, since they show a rather soft flex behavior as a result of their smaller cross section. Therefore, they are primarily suitable for Wave/Freestyle sails
with the additional advantage that they are easier to grip during maneuvers. On the other hand large, mostly performance-oriented sails need stiffer masts with a “more direct“ flex. This characteristic demands a larger mast cross section in order to ensure reaching the required stiffness.







Now often imitated but still unrivaled:

groundbreaking development in the NorthSails mast construction is the POLY.SHIELD coating. This is a highly abrasion-resistant material that is also used for ski and snowboard bases and is unique in its capabilities. Carbon fiber is very stiff, but not particularly resistant to abrasion. Especially in the area of the boom and camber, but also at the mast leading edge, the carbon fibers are now effectively protected by the POLY.SHIELD against abrasion. As the only brand we use un-dyed polyamide, in its natural white color, which improves the abrasion resistance compared to dyed polyamides by 20%. The POLY.SHIELD covers the entire surface of all PLATINUM and GOLD masts, as well as the base of the SILVER SERIES! This means no more wear, scratches or damage to the carbon fibers.




14_mast_feature5.pngNEW MAST MEASURING METHOD

for significantly improved bend curves and increased breakage strength

The industry standard IMCS mast check method meanwhile is over 30 years old. The bend curve families Flex Top, Hard Top and Constant Curve are set too wide and un-precise for modern performance sails. A so-called Constant Curve mast that almost corresponds to a Hard Top mast has nothing in common with a Constant Curve mast, which is close to a Flex Top mast. In order to clearly document that the bend curve of all our masts lies between these two extremes, from now on we label this curve with MEDIUM.CONSTANT.CURVE. Through the introduction of a new type of hydraulic mast measurement system with digital control technology (combined bend curve and crash check) now it’s possible to adjust the bend curve over the whole length and find ways to improve the breaking strength. Ongoing tests thus guarantee a reliable quality control.

Thanks to our new mast measuring and our refined IMCS system, we were able to analyze the masts of all other brands. This allows us to say exactly how good NorthSails masts work with other brand sails or which masts from other manufacturers are compatible with NorthSails.


NorthSails compatible masts/sails: Aerotech / Avanti Sails / Ezzy Sails / Goya Sails / Gun Sails / Hot Sails / KA Sails / Loft Sails / Maui Sails / Naish Sails / Sailloft / Sailworks / Severne
NorthSails partly compatible masts/sails (at about 30-40% performance loss): Challenger Sails / Point 7 / RRD / Simmer Style / XO Sails
NorthSails incompatible masts/sails:
HARD TOP: F2 Sails / Gaastra / Vandal
FLEX TOP: Hot Sails / Tushingham / Neil Pryde / Attitude Sails